Jablotron Ja-80t Driver
- PG Security Systems brengt u vandaag een update uit het Hikvision assortiment, met o.a. De Darkfighter PTZ, WDR.
- Jablotron JA-8X and JA-6X series control panels can be connected to a computer via the JA-80T interface cable. Connect the control panel’s external digital bus connector to the JA-80T interface input using a cable with suitable RJ connectors. Then plug the JA-80T’s USB plug into a free USB port on your PC. The correct drivers must be.
Jablotron Ja-80t Driver Windows 7
JA-80T WINDOWS 7 DRIVER INSTALLATION. Preparation: 1, Download the driver file onto your PC hard drive into a special folder. 2, Unpack the driver file using the program Win Rar into the same folder (don´t use Windows or any other commanders for unpacking!!!) 3, Now you can open the device manager.
Latest A-Link package version 1.1.1.654 to download (AZOR firmware LO60313) Note: This version includes innovative certificate for antivirus software. Nowadays operating systems require it.
How to update: 1. Make sure that the communicator is powered by a power supply before starting the upgrade 2. Connect the communicator to your PC via a USB cable. Run the A-Link program on the newly assigned communicator logical drive. Please check the version of firmware in your Azor (click the 'Version' tab and check the 'Firmware' field). If your firmware is LO60309 or higher, go to step no.10.
Download fwp update and save the latest fwp software to your hard drive. In the main menu select the 'Communicator' tab - choose 'Update software'.
Select the file with a.fwp extension from the folder, where you saved it (step 5). Follow the instructions on the screen and wait till the update is finished. The A-Link program stops and performs a communicator restart. As a confirmation, two LEDs flash with a blue color.
Download fwx update and also save the latest fwx software to your hard drive (it is a second file). A) Run the A-Link program again and it performs the second step of the update itself using the file with a.fwx extension from the folder, where you saved it (step 10). B) If the firmware version in your Azor is LO60309 or higher, in the main menu select the 'Communicator' tab - choose 'Update software'. Select the file with a.fwx extension from the folder, where you saved it (in step 10). The A-Link program stops and performs a communicator restart.
Wait for approx. 2 minutes till the red LED (labeled GSM) goes off. The firmware in the communicator and the A-Link software are now up-to-date and ready to be used again. Latest A-Link package version 1.1.1.654 to download (AZOR firmware LO60312) How to update: 1.
Make sure that the communicator is powered by a power supply before starting the upgrade 2. Connect the communicator to your PC via a USB cable. Run the A-Link program on the newly assigned communicator logical drive. Please check the version of firmware in your Azor (click the 'Version' tab and check the 'Firmware' field).
If your firmware is LO60309 or higher, go to step no.10. Download fwp update and save the latest fwp software to your hard drive. In the main menu select the 'Communicator' tab - choose 'Update software'. Select the file with a.fwp extension from the folder, where you saved it (step 5). Follow the instructions on the screen and wait till the update is finished. The A-Link program stops and performs a communicator restart.
As a confirmation, two LEDs flash with a blue color. Download fwx update and also save the latest fwx software to your hard drive (it is a second file).
A) Run the A-Link program again and it performs the second step of the update itself using the file with a.fwx extension from the folder, where you saved it (step 10). B) If the firmware version in your Azor is LO60309 or higher, in the main menu select the 'Communicator' tab - choose 'Update software'. Select the file with a.fwx extension from the folder, where you saved it (in step 10). The A-Link program stops and performs a communicator restart. Wait for approx. 2 minutes till the red LED (labeled GSM) goes off.
Jablotron Ja-80t Driver Manual
The firmware in the communicator and the A-Link software are now up-to-date and ready to be used again.
Hi, I got an Jablotron JA-80 alarm in my new house. When i got the key, i dident get the cable for the alarm inside the house.
I have searched a bit, and can see that i can buy one of theese (Original equipment) (JA-80T is a converter that has no driver build in to the device) - I have found this guide - and think it will be no problem to install manually. (JA-82T got the driver inside the device and will work out of the box) My question is: The one side is an RJ4 plug - in both ends RJ4 - RJ4 Converter USB A - USB B Is it possible to find this connector on ebay - without is has to be original parts? Its hard to find an RJ 4 plug with converter to USB. Total cost for shipping to me is over 50 euro. Hope you can help me.
Comments are closed.